// What should we pay attention to when installing and using the LED waterproof connector?-HYFD waterproof connector factory | HUAYI-FADA TECHNOLOGY Co., Ltd
TEL:86-0755-81486685
CN | EN
CN | EN

What should we pay attention to when installing and using the LED waterproof connector?

Release Time:2019-06-30 17:01

LED waterproof connectors can be used in watery environments.Such joints can not only provide a safer and more reliable operation, but also protect the performance of the cable.

So what should you pay attention to when using the LED waterproof connector?


Led waterproof connector installation instructions:

1. Be sure to purchase the best joint material according to the model and specifications of the cable connector.It is necessary to know that there are many specifications of the cable now, and only a suitable waterproof joint material can be selected for better protection.

2. When the cable is under the joint, do not try to choose to do it on the rainy days.If the cable is in the water, this will affect the cable life and related performance.

More Seriously, it may even cause a short circuit or other malfunction of the product.

3. For the production of LED waterproof joints, we must carefully read the instructions provided by the relevant suppliers.You must make sure that every step is done and operated according to the specified procedures.

4. When pressing the copper tube, remember not to use excessive force.Just press the right position.After crimping, the copper end face usually has a phenomenon such as a raised point.

At this time, everyone must use a sickle to flatten the raised points, and there must be no burrs.

5. For heat shrinkable cable joints, when using professional blowtorch,be sure to pay attention to the use of the blowtorch. It is correct to move back and forth. Do not just blow the lamp in one direction or part.

6. The size of the frequency conversion cable connector must be strictly operated in accordance with the relevant instructions , we must be careful when extracting the supported objects inside the reserved tube.